High speed engraving  milling machine
                                    Your current location : Home >> Products >> CNC gantry milling machine

                                    CNC engraving milling machine ymc-8070

                                    2020-10-23 11:42:38
                                    second
                                    CNC engraving  milling machine ymc-8070
                                    Detailed introduction:

                                    機器規格:YMC-8070系列

                                              項次          

                                    項  目

                                    技術參數

                                    1

                                    X/Y/Z行程

                                    700/800/300mm

                                    2

                                    工作臺最 大負重

                                    600Kg

                                    3

                                    龍門寬度

                                    860mm(大約值)

                                    4

                                    龍門高度

                                    410mm(大約值)

                                    5

                                              最 大走刀速度(G01)          

                                    6000mm/Min

                                    6

                                    最 大移動速度(G00)

                                              XY:15000mm/Min Z:7500mm/min          

                                    7

                                    主軸

                                    8kw

                                    8

                                    主軸額定轉速

                                    18000RPM

                                    9

                                    主軸錐孔規格

                                    ER32(選配BT30/BT40)

                                    10

                                    整機毛量

                                    3.5t



                                    CNC door milling safety operation code

                                    1. Operators must receive training before operation, be familiar with master the main specifications technical parameters of Yiming industrial engraving machine tool, master the operation of machine body.

                                    2. The operator must have basic knowledge of numerical control understand the hydraulic system structural performance of the machine tool. The operator must check the machine tool its accessories before starting, including checking whether the power supply voltage are stable whether the gas supply is normal.

                                    3. According to the correct operation procedures, turn on the full power supply, oil pump, control power supply, servo power supply, etc. of the small-sized CNC gantry milling machine, the failure must be carried out according to the specified sequence. In addition to life, machine damage, material damage other factors. No load. No load. When the machine is switched off, the workpiece must be reset to zero.

                                    4. The operator must understand the general alarm content of the machine tool the general method to eliminate the alarm; if the alarm information of the machine tool belongs to the operation information, the operator can operate according to the instructions; if the machine tool belongs to the alarm information, the operator must take corresponding measures inform the equipment manager.


                                    數控雕銑機 YMC-8070

                                    數控雕銑機 YMC-8070


                                    YMC-8070

                                    Label

                                    Next:None

                                    Recent:

                                    Related products

                                    Related news

                                    99re8在线播放国产精品