High speed engraving  milling machine
                                    Your current location : Home >> Products >> High speed graphite machining center

                                    Crane type high speed graphite machine gt-700

                                    2020-10-23 11:46:33
                                    second
                                    Crane type high speed graphite machine gt-700
                                    Detailed introduction:


                                    GT-700主要規格及技術參數


                                                規格說明/DESCRIPITION            

                                      單位/UNIT  

                                    GT-700

                                              ●          

                                    行程/TRAVEL




                                    XYZ軸導軌型式


                                    高剛性滾珠線軌


                                    X軸行程

                                    mm

                                    700


                                    Y軸行程

                                    mm

                                    600


                                    Z軸行程

                                    mm

                                    350


                                    主軸鼻端至工作臺面

                                    mm

                                              150-500(大約值)          


                                    雙柱間距離

                                    mm

                                    960(大約值)

                                    工作臺/TABLE




                                    工作臺尺寸(長)

                                    mm

                                    700


                                    (寬)

                                    mm

                                    600


                                    最 大載重

                                    kg

                                    350

                                    主軸/SPINDLE




                                    主軸轉速/RPM

                                    rpm

                                    無級變速30000rpm


                                    主軸內孔錐度/TYPE


                                    BT30

                                    進給/FEED RATE




                                    G00 快速進給(X軸)

                                    mm/min

                                    15000


                                    G00 快速進給(Y軸)

                                     mm/min  

                                    15000


                                    G00 快速進給(Z軸)

                                              mm/min          

                                    15000


                                    G01 切削進給

                                    mm/min

                                    1 – 10000

                                    其他




                                    機器重量

                                    kg (約)

                                    5000


                                    刀庫


                                    12T-傘形


                                    定位精度


                                    0.008/300mm


                                    重復定位精度


                                    0.005/300mm

                                     




                                    security check

                                    The power switch of large CNC engraving milling machine is reliable.

                                    During the inspection, the grounding wire shall be broken, the fasteners shall fall off, the zero line the ground wire shall be set separately, there shall be clear grounding marks. The grounding resistance measured by the resistance meter shall exceed 0.30.

                                    A MEO instrument is used to measure the insulation resistance. DC500v can be added between the power line the protection point for 60 seconds without breaking flying arc.

                                    Inspection rules: Inspection type inspection of this series of products

                                    Exit inspection

                                    The products are inspected by the quality inspection door of engraving machine manufacturer before leaving the factory, the verification certificate is attached.

                                    The inspection items are 5.1, 5.2, 5.3, 5.4, 5.5, 5.6, 5.7, 5.8, etc.

                                    Type test

                                    Type testing should be carried out in one of the following situations.

                                    New product identification time

                                    Material change in process B

                                    C. normal production year long-term shutdown to resume production

                                    Type inspection items are all items of this standard

                                    Sample type test

                                    The prototype of type test shall be taken the qualified products inspected in the factory. Each sample shall be less than one.


                                    天車式高速石墨機 GT-700

                                    天車式高速石墨機 GT-700


                                    GT-700

                                    Label

                                    Last:None
                                    Next:None

                                    Recent:

                                    Related products

                                    Related news

                                    99re8在线播放国产精品